Usage
Home >> product >> usage
| Precision optical parts | Medical equipment | ||
 |
|
 |
|
| Vehicles / Transportation | Jig | ||
 |
|
 |
|
| Electronic equipment / semiconductor manufacturing equipment | Sliding machine parts | ||
 |
|
 |
|
| Lighting equipment | Food manufacturing equipment | ||
 |
|
 |
|
Precision optical parts
Precision optical components such as cameras and light source devices, especially components around the lens, are required low reflectivity and dimensional accuracy. Black alumite processing is generally performed. We propose "finish zero"(dimensional change ± 0 μm finish.) and "TAF TR BK" which are good at optical parts.
【CASE】
to the special optical parts TAF TR BK " Heat resistance test 120 ℃ × 2000 hours OK (no cracks and discoloration) ... others
Medical equipment
Although I think that there are various kinds of medical equipments, in our actual achievement especially "TAF OAM" or "TAF TR". These two treatments are harder and have better corrosion resistance than ordinary alumite. Moreover, cracks do not occur like hard alumite, and it becomes possible to obtain a film with small surface roughness. Furthermore, heat resistance is also better than usual, and it is also possible to use black. ※ The heat resistance is better with "TAF TR".
【CASE】
"TAF OAM" to the medical inspection equipment cylinder Good slidability (abrasion resistance) ... others
Vehicles / Transportation
I think that die casting such as ADC 12 will be used in many applications. We have permanent alumite line for ADC 12 permanently, and ADC 12 which is said to be difficult for general alumite can give excellent corrosion resistance. We have a track record of highly corrosion-resistant alumite, including parts for automobiles, so please contact us.
【CASE】
High anti-corrosion alumite corrosion resistant composite cycle test to automotive electrical system cover Good ...
Jig
In this field, hardness and abrasion resistance are often emphasized. Hard alumite "TAF Hard" and ultra hard alumite "TAF TR" are excellent coatings It is possible to get. "TAF TR" is effective when it is exposed to a hot environment or high voltage, and if demoulding etc. is required, "TAF Lube".
【CASE】
TAF TR heat resistance test to component heat treatment jig 350 ℃ or more OK (no crack)
TAF TR to the semiconductor test fixture Good insulation test under high temperature ... others
Electronic equipment / semiconductor manufacturing equipment
In electronic devices, alumite is often used because it is required to have insulation properties, withstand voltage and heat dissipation, but our company has high withstand voltage "TAF TR "to our customers. " TAF TR " is crack-less, so it can give higher withstand voltage compared with ordinary alumite. In addition, the base alumite "TAF AD" is effective for the base of printed circuit board etc. " TAF AD " may have a two-layer structure of " TAF TR " Is possible.
In semiconductor manufacturing equipment, " TAF TR " is effective, which does not cause cracks and prevents the generation of dust.
【CASE】
"TAF AD" Good adhesion test as the printed circuit board base
" TAF TR " to semiconductor manufacturing equipment parts Heat resistance test 300℃ OK (no cracks / dust generation) ... others
Industrial machine sliding parts
The demand of film performance is vary widely, but when focusing on the main purpose hardness, wear resistance and sliding properties, "TAF Hard" "TAF Lube" TAF TR "is fit for your demands.
Both are hard alumite, " TAF TR " is the hardest and has excellent heat resistance (depending on material), lubricating performance for the purpose of preventing initial galling wear, etc. If you want to give "TAF Lube".
Lighting equipment
Lighting equipment not only has aesthetic appearance but alumite treatment is often used when heat dissipation is required.
However, some lighting equipment parts are quite hot, and in this case normal alumite is not enough. " TAF TR " or " TAF TR BK " It will be able to withstand high temperatures.
【CASE】
" TAF TR BK " to the LED lighting fixture Heat resistance test 180 ℃ × 1000 hours OK (no cracks / discoloration) UV resistance test OK (no discoloration) ··other
Food manufacturing equipment
In this field also the type of coating changes greatly depending on the required performance.
"TAF series" general is recommended, but among them our new proprietary technology " TAF TR " or " TAF TR BK "(both crackless heat-resistant alumite) have a lot of possibilities to solve customers' troubles.
【CASE】
"TAF hard" to wrapping parts good abrasion resistance
" TAF TR BK " Heat resistance test on heating parts 200 ℃ OK (no cracks / discoloration) ... etc.